5 Things to Avoid when Caring for Vancouver Vacuums

When you purchase a new vacuum, you make an investment in the health of your home. That means that you probably want to be sure you always adequately maintain your machine. But do you know what to do when caring for Vancouver vacuums? Some new owners tend to over care for their vacuum cleaners, literally “loving them to death.” Though vacuums may seem like complicated pieces of equipment, it is important to keep your maintenance at a minimum. Make your job as an owner easier and extend the life of your vacuum by avoiding these vacuum maintenance mistakes.

Ditch the Water

Many owners use too much water or cleaning chemicals to maintain their vacuum when they notice a dirt buildup. It is not necessary, and is bad for your machine, to use a lot of water or liquid solutions. Never soak or submerge the parts of your vacuum. Use a damp cloth and a vinegar solution to wipe down the inside and outside of your cleaner. This will do an excellent job of properly maintaining the machine when caring for Vancouver vacuums.

Do Not Play Mechanic

Your vacuum contains many small, vital parts that should only be handled by professionals. If you are experiencing an issue with your machine, don’t try to be the mechanic by removing different parts or components. Quality vacuums are very expensive, and damaging or losing parts can result in a huge loss of money. It could even result in putting your machine into an irreparable condition. Instead, to ensure you are properly caring for Vancouver vacuums, bring it into Advantage Vacuums for repair.

Do Not Get Lazy with Cord Storing

Your vacuum’s electrical cord is a key to continuing to work like new for your family. Always take the time to properly roll and store the cord. A damaged cord can result in loss of power to the vacuum, or even a fire. If you notice any broken or frayed pieces of cord, immediately call an expert on vacuum cleaners to assess the damage and replace the cord.

Pick Up Large Objects

Though your vacuum may be capable of vacuuming surprisingly large objects, make maintenance easier by gathering this waste before you begin to vacuum your floors. Sucking up large objects can damage multiple parts of your vacuum without you even realizing the culprit has been there. If you accidentally capture a large object in the path of your vacuum, immediately shut off the machine and remove it.

Never Use a Wet Filter

Filters are the only part of your vacuum that you can confidently submerge in water. It is necessary to run them under a faucet, perhaps using a bit of soap, to be sure they are adequately cleaned. Although soaking the filters for your vacuum is necessary, be sure that you do not place them back into the machine until they have thoroughly dried. Vacuuming with a wet filter will cause the dirt to be trapped incorrectly and damage your expensive machine.

Keeping up the proper maintenance of your vacuum is very important to ensure it gives you a top quality performance for many years. If you feel that you are incapable of fixing a problem with your machine, or believe that your cleaner needs a regular maintenance appointment, contact a professional such as Advantage Vacuums.

Investing in a good quality vacuum cleaner that requires little maintenance is a way to bring simplicity to your life. Advantage Vacuums offers a line of products that are easy to maintain and clean your floors at professional levels. For more information, visit our Miele vacuums page.