Maintenance Tips for Your Vancouver Vacuum

Top Vacuum Maintenance Tips to keep your vacuum cleaner in tip-top shape

The vacuum cleaner is one of the essential cleaning tools in your home. In order to keep it working in top shape, regular maintenance is needed. Here are some vacuum maintenance tips you should do to keep your Vancouver vacuum running in top shape.

Vacuums Have Filters

You may be familiar with the air filter in your car or your furnace, but your vacuum cleaner has an air filter as well — possibly more than one. If those filters become clogged, you may notice that your vacuum is losing power and is not able to handle messes as well. Check to make sure what kind of filter you have. Some can be cleaned and replaced in the vacuum and some are disposable and need to be thrown away. One of the top Vacuum Maintenance Tips is to never clean your disposable filter. That is never a good idea.

Soap and Vacuums are a Bad Mix

Don’t be tempted to clean your vacuum with soap and water. Soap can cause all sorts of issues with your vacuum cleaner, including the filters, the impeller (the part that does all the sucking) and even the hoses on the inside. If you are cleaning a reusable filter, just use warm water. If you are cleaning the outside, do the same. Next in our vacuum maintenance tips is to keep the soap in the sink for dishes and away from the vacuum.

Have the Right Tools

Some vacuums require tools in order to do unclogging and maintenance. This means a set of regular screwdrivers as well as some specialty tools. A good rule of thumb: If some light pressure isn’t enough to loosen the screw, you probably have the wrong type of screwdriver. Star and hex heads are also common on some cleaners. Another one of our vacuum maintenance tips; Use the right tools. Using the wrong type of screwdriver can damage the screws and force you to buy new ones if you can find them at all.

Clean and Unclog the Head

When you turn your vacuum over and look at the spot where the brushes are sitting and turning, that is the head. This is what is doing a good portion of the cleaning heavy lifting. If your head is clogged, it can prevent your vacuum from working properly.

Good vacuum maintenance tips include looking for strings and hair wrapped around the brush head. This can stop the brushes from spinning properly. Clogs can also cause wear on the motor that spins the brushes as well as damage to the internal belts that make the brush spin.

There will also be an inlet in the head. This is where all the dirt gets sucked up into the bag. This can become clogged up as well. Pull out what you can by hand. Never stick sharp things into this opening, as you can poke a hole in the hose and damage your vacuum cleaner.

Know your Limits

And the best of the vacuum maintenance tips: if you are uncomfortable around tools and don’t feel like taking apart your vacuum is the best idea, then consider contacting Advantage Vacuums. We can keep your Vancouver vacuum running in top shape. Contact us today about getting your vacuum serviced.